Whether you are ripping up old carpet and discovering beautiful wooden floors or have recently completed a renovation, sanding and polishing can breathe new life into your timber flooring. It can also help balance out uneven sub-flooring and eliminate deep scratches and scuff marks.
Before sanding begins, nails or tacks must be punched and staples removed, as they will clog sanding equipment. For more information about floor sanding Adelaide, contact floor sanding Adelaide now!
Rejuvenates the Appearance of Old Floors
Floor sanding is an inexpensive way to rejuvenate timber flooring. It removes old, scratched surfaces and balances out uneven sub-flooring. It also helps eliminate unwanted bevelled edges in pre-manufactured, prefinished floors. Additionally, a sanded floor is easier to clean and more resistant to everyday damage.
Before sanding commences, all nails must be punched down and tacks removed to allow the machinery to work unhindered. A coarse-grade sandpaper is used to strip away existing floor finishes and coats. The flooring is then sanded with progressively finer grades of sandpaper until a smooth, even finish is achieved.
Once the sanding process is complete, the floor must be vacuumed to remove all dust. Then, it is ready for staining. There are a few different ways to stain a wood floor, including dyes and pigments. Pigments work differently from dyes, absorbing the grain of the wood. The stains are then sealed with a high-quality polyurethane coating.
Removing Unwanted Beveled Edges
Floor polishing is a favourite home improvement of many homeowners. It dramatically improves the appearance of a property’s floors and helps create a sense of space and light. In addition, polished flooring looks better under rugs and is easier to clean. For more information about floor sanding Adelaide, contact floor sanding Adelaide now!
Professional sandalwood floors usually start with coarse grit and then progress to finer grits until the desired finish is achieved. This will compensate for uneven sub-flooring and renew the appearance of old floors with deep scratches.
During this stage, the sanding technician will also remove any slopes that may be present. This is a difficult task as it depends on how well the hardwood was milled and the original subfloor condition when it was installed.
This is why a large job such as a through lounge or large sitting room and hallway of 25 sqm or more would greatly benefit from having a second person working with you so they can sand the edges while you are doing the central area. This will save you money on the hire of machines.
Getting Rid of Uneven Sub-Flooring
If your floorboards are scuffed, scratched or damaged, a professional sanding service can return them to their original condition. A sanding technician can also help remove unwanted bevelled edges and balance uneven sub-flooring. This sanding process is an essential step in any floor renovation and should be performed carefully to ensure the quality of your timber floors.
The sanding stage begins with coarse grades (or grit) of sandpaper, which level the floor and remove dents in the surface. A finer grade of sandpaper is then used to smooth the coarse sanding marks and prepare the floor for the coating stage. For more information about floor sanding Adelaide, contact floor sanding Adelaide now!
To avoid stop marks, lowering the sanding drum whilst simultaneously moving forward is recommended, which prevents harsh lines from appearing. Moving furniture or appliances before sanding is also a good idea, as this will protect them from scratches and damage. In addition, you should put protective pads on the feet of any heavy furniture to minimise indentations in your new timber floors.
Getting Rid of Dust
Floor sanding and polishing are good ways to add value to your home, especially if you want to sell it. It will also remove stains and scratches and allow the wood to reflect light more efficiently. However, planning and preparing the area for sanding is essential to minimise the mess and disruption. Vacuuming before and after each sanding process will ensure fewer dust particles, while masks or goggles protect against inhalation.